R-Series LED Display


Understanding the display

The state of the charge point is communicated via three coloured LEDs (lights) on the front of the unit, 'Network', 'Charge' and 'Fault'. The LED flash codes are documented below.


Connected to the cloud

Under normal operation, the network light on your charge point should softly fade in and out, indicating that your charge point has successfully connected to the cloud and is ready to charge.

Evnex R-Series display flash code connected

Trying to connect to the cellular network

When first powered on, or when signal has been lost, the network light on your charge point will flash slowly, indicating that it is looking for a cellular connection.

Evnex R-Series display flash code connecting to the cellular network

Trying to connect to the cloud

If the network light flashes quickly, this indicates that your charge point has an internet connection and is trying to connect to the cloud.

Evnex R-Series display flash code connecting to the cloud

Preparing to charge

If the charge light flashes slowly, this indicates that the charge point is preparing to charge. This can mean one of two things:

  1. A vehicle is plugged in, but not charging. This could mean that the vehicle has finished charging, or that the charge point or vehicle has a timer activated.
  2. An RFID card has been swiped and is recognised by the system. The charge point is now waiting for a vehicle to be connected before the card authentication times out.
Evnex R-Series display flash code preparing to charge

Vehicle charging

When the charge light glows solid, a charging session is in progress.

Evnex R-Series display flash code charge in progress

RFID card detected

When all three lights flash once, an RFID card has been detected.

Evnex R-Series display flash code RFID card detected

RFID card not recognised

When all three lights flash once, followed by 5 flashes of the fault light, an RFID card has been detected, but was not recognised by the system, or not authorised for this charge point.

Evnex R-Series display flash code RFID card not recognised

Fault

If the fault light glows solid, this indicates that there is a fault with the charge point or vehicle. Please check the app for more information, or contact us for support.

Evnex R-Series display flash code fault