R-Series Charging Station

Designed and manufactured in New Zealand for seamless operation with our CP Link software. Compatible with every electric vehicle.

Illustration of Evnex charging station

Easy to use, everything you need, nothing you don't.

Connected, built tough, and faster than your portable charging lead. Choose between 7.4kW single phase or 22kW three phase.
Stockholm-icons / Communication / Clipboard-check Created with Sketch.

Certified and safe

Safe and tested to the latest standards. (IEC 61851-1:2017, IEC 61851-21-2:2018)

Stockholm-icons / Devices / LTE#2 Created with Sketch.

LTE cellular connected

No need to worry about making sure you're in WiFi range. Simply connect power and you're online.

Stockholm-icons / Home / Bulb#2 Created with Sketch.

Latest technology

Built in DC leakage current detection means no expensive Type B RCD required. (Please refer to local regulations).

Evnex mobile app charging status screenshot
Evnex mobile app add charge point screenshot

Easily configure charging stations from your mobile device.

R-Series charging stations can be configured via our mobile app securely, without the need for USB drives or Ethernet cables.

Learn more about our mobile app
Evnex CP Link load management screenshot

Avoid overloading your supply with smart load management features.

Reduce energy use during times of high demand by setting a maximum charging speed for every hour of the day.

Learn more about CP Link

Product Options


7.4kW | Single Phase | Socket Outlet


7.4kW | Single Phase | Type 1 Cable


7.4kW | Single Phase | Type 2 Cable


22kW | Three Phase | Socket Outlet


22kW | Three Phase | Type 2 Cable

Evnex R7 Type 2 Socket Charging Station
Evnex R7 Type 2 Cable Charging Station

Unsure which option is right for your vehicle?
Check our list of common vehicles here.

Looking for charging cables or other accessories?
See our accessories here.

Technical Specifications

Product datasheets can be downloaded in the resources section.

Electrical Properties

Charging capacity 7.4kW, 32A single phase (R7)
22kW, 32A three phase (R22)
Voltage 230VAC 50/60Hz (R7)
400VAC 50/60Hz (R22)
Cable configuration (1) SAE J1772 Type 1 cable (5m)
(2) IEC 62196-2 Type 2 cable (5m)
(3) IEC 62196-2 Type 2 socket
Upstream protection Requires dedicated single or three phase circuit breaker + type A residual current protection (refer to local regulations). Phase current is adjustable in 1A steps from 6-32A if installation requires.
Metering Yes
Cellular modem 3G/2G quad band or LTE-M
Local configuration interface Bluetooth LE
Display LED (Network, Charge, Fault)
Control & monitoring Evnex CP Link dashboard or mobile app
Authorisation RFID ISO/IEC 14443, 13.56 MHz
Compliance IEC 61851-1:2017, IEC 61851-21-2:2018
DC leakage detection IEC 62955 6mA DC residual current monitor
Protection Over voltage, under voltage, over current, over temperature, ground fault
IP rating IP54 (indoor / outdoor)
Dimensions 373 (height) x 212 (width) x 142 (depth)
Operating temperature -25°C to 40°C
R7-T2S-3G Single phase, 7.4kW, socket outlet, 3G modem
R7-T2T-3G Single phase, 7.4kW, T2 cable, 3G modem
R7-T1T-3G Single phase, 7.4kW, T1 cable, 3G modem
R22-T2S-3G Three phase, 22kW, socket outlet cable, 3G modem
R22-T2T-3G Three phase, 22kW, T2 cable, 3G modem