Evnex E2 Core EV charger [trade]

The E2 Core provides drivers with a smart charger at an affordable price point, with solar smarts, home overload protection, and carbon monitoring included.

The E2 Core adds up to 50km of range per hour at 7.4kW. The Power Sensor Kit add-on makes the E2 Core the complete solution for three-phase homes with solar.

Use cases;

• Single-phase homes (with or without solar)
• Multi-phase homes with solar (requires Power Sensor Kit add-on)
• Requires a reliable Wi-Fi connection

Volcanic colour only, 5m tether.

Please note: the E2 Core does not have 4G connectivity included, so it is important to confirm your customer has a reliable Wi-Fi connection at the charger location.

What’s included?  

• Evnex E2 Core - Wi-Fi only (7.4kW)
• 5m tethered charging cable
• Charging cable hook
• 1x 100A CT
• E2 Core user manual
• E2 Core installation manual

Optional Power Sensor Kit add-on;

• 230V/12V DIN rail power supply for power sensor
• 2× 100A/50mA current transformers (CTs); the third CT is packaged with the E2 charger
• Power sensor link kit and installation manual

Features;

• Mobile app: including access to all charging features.
• Multi-phase solar diversion: due to the hardwired CT and multi-phase monitoring kit, our solar charger is inverter agnostic and works with any inverter.
• Multi-phase solar monitoring: provided by the power sensor kit add-on, included in this bundle.
• Home overload protection: slowing or pausing chargers if the incoming supply is at risk of overloading.
• Comprehensive support: our support team is based in New Zealand and can remotely connect to chargers to assist with account setup, commissioning, and charger settings for you and your customers.

You can deep dive into our features in the Evnex Knowledge Hub.

Connectivity;

• All Evnex chargers require connection to our cloud once every 28 days
• This connectivity allows drivers to control their charger and uploads diagnostics so our team can provide exceptional support
• If a charger loses connection for less than 28 days, the charger will function as it has been set up to do
• The E2 Core is a Wi-Fi only charger. If you require 4G connectivity, our E2 Plus is supplied with both Wi-Fi and 4G connectivity options

Multi-phase power sensor installation;

Mounts on standard 35mm DIN rail inside the distribution board. CTs clip onto incoming phase conductors. 12v DC power supply and wiring loom included.

QLD installations;

For customers located in QLD, the QECM requires chargers with nameplate ratings greater than 20 amps to have device management installed.

Evnex has implemented an option for QLD customers where the nameplate rating is reduced to 20 amps during commissioning, therefore not requiring device management. Learn more here.

Requirements;

• Wi-Fi connectivity
• Minimum of 1.5kW for solar charging to commence
• 32amp circuit + 1 pair, mains rated, overall screened ≥ 0.5mm instrumentation cable
• Dedicated RCBO — 30mA Type A (C-curve)
• Power Sensor Kit add-on: 3 poles required on DIN rail (1x DC power supply, 1x power sensor module, 1x charger RCBO)